Description
This Solo guitar body is intended as a replacement or DIY project. Body specifications may have a +/- 1 or 2mm variance. If using this body with a non Solo neck / Solo hardware, slight modifications may be necessary in order to achieve a proper fit.
Specifications:
- ST Style guitar body
- Poly Resin Sealer
- Body thickness: 1 11/16″
- Neck pocket: L: 2.96″ x W: 2.18″ (narrow point) 2.20″ (widest point) x H: 0.68″
- Basswood body
Item Shown: Solo STB4B-U Unfinished Guitar Body
Model #: STB4B-U
UPC: 0787392885131
djlevy54 (verified owner) –
Body was in very good condition. Had to expand the middle pickup cavity and bridge cavity a little for everything to fit and line up. Not a problem with a Dremel since the basswood is quite soft. Very easy to sand by hand. Grain is okay but I elected to seal it and go with a high gloss enamel finish to cover the grain. Predrilled for the ground lead to the bridge and the output jack leads but I expanded the hole to the output jack because it was a little too tight pulling the leads through. The neck I bought was a snug fit in the neck pocket but the neck screws are not predrilled.
stretchhh52 (verified owner) –
Body was in good condition lightly sanded it and paint. Was my first time buying a body