Congratulations goes out to Daniel Voyer for his guitar build, to earn him Guitar of the Month for July 2026.
Daniel used our PRK-10 kit as the basis to create his guitar.
“For a long time, I have dreamt of owning a PRS McCarty 594. However, I could not convince myself that it was worth the money to buy a real PRS when I could build 10+ great kits for the same price. Then, I found the PRK-10 kit! Of course, in my mind, I saw the legendary PRS birds inlays on the fretboard but I was not sure if that was something I could handle. Given that my dream was about the 594, I had to modify the kit’s 24.75 inch scale to 24.594., which required replacing the fretboard on the kit anyway. So, I decided to try my hand at making the bird inlays myself.
To figure out the size and shape of each bird inlay, I printed a drawing of each bird that I found online and made sure that each paper version fit at the appropriate fret location. When I had that figured out, I glued the paper drawings on white acrylic I found in my garage and started carving the birds. That was painstaking work and I had to start over on a few of them. However, with lots of patience and puttering at it everyday for a few weeks, the birds took shape. Next, I used a rosewood neck blank, drew the fret locations for a 24.594 scale, and started digging each inlay cavity. When that was done, I glued each inlay in place and then I started sanding. When the acrylic was nearly level with the fretboard surface, I used sawdust from the rosewood to fill spaces where the cavity was too large. That was also a matter of much patience as I patched, sanded, then patched some more, and so on, until the fretboard was at the correct thickness and radius (12 inches) and no gaps were showing. After this was done, I cut the fret slots.
By then, I knew I had done it! I removed the original fretboard from the kit and glued mine on, installed the frets, levelled them, crowned them, etc. I also had to carve the heel on the neck to make it fit the scale, but after all that work, that seemed easy. I also topped the headstock with a 1/16 inch thick piece of pine and shaped it to resemble the one of the McCarty 594. At this point, I just had to follow assembly instructions from the kit manual, but I also did a few more modifications.
Since I wanted a top notch guitar in all aspects, I modified the hardware and electronics to get what I was looking for. This means I installed Hipshot tuners, Gotoh bridge and tail piece, a Graph Tech black nut, PRS style knobs, CTS pots with a vintage .033 cap from 1979 that I had in my spare parts, microswitches to split coils, and Seymour Duncan “Saturday Night Special” pickups.
For finishing, I kept the neck and body natural but applied 3 coats of black dye on the top, sanded it and then applied tangerine dye before applying 10 coats of wipe-on varnish to the whole guitar. It looks exactly as I wanted. It’s also one of my best sounding guitar (if not the best sounding one). These Saturday Night Special pickups are indeed special! I’m particularly proud that I was able to set a low string action after my fretboard work. In the end, this guitar is so much fun to play and it makes me a better guitarist. It was well worth all the work!
All of you at Solo Guitars are welcome to drop by to try it! Thanks for making this possible.”
– Daniel Voyer












7 Responses to “Guitar Of The Month – July, 2026”
Beautiful work on those inlays! Great build!
Great job! I like using wipe on poly myself. I curious about tthew pickups. Were they stock or did you source them elsewhere?
Had to log in just to say congrats, and amazing workmanship. I know what you mean about patience and time and you have done some very beautiful work here. Maybe I’ll even try a set of Duncan SNS on a Custom 24SE I have here.
Very, very nice.
Beauty job man – I was wondering how you did that amazing top ..! The more I see these kits as the basis for some really slick builds the more tempting trying one on my own becomes -SBB
What patience to get those inlays – they look incredible! And love the look of the natural wood on the back. The grain from the body to the neck looks smooth.
Thanks Gord!
Didn’t realize it did not post reply after the original comment, so I’ll thank everyone for their kind comments here. Concerning the pickups, they’re stock Seymour Duncan I got from Solo. I was on a wait list for a long time, but it was worth the wait. I recommend them enthusiastically to all my friends! For the top, I just highlighted the quilted maple veneer with black Rit clothes dye, then sanding, and then tangerine Rit dye. It shimmers under light. The back definitely needed nothing else than the poly. It was shimmering even before I varnished.