Congratulations goes out to Randy K. for his guitar build, to earn him Guitar of the Month for May 2026.
Randy used our FBK-1 kit as the basis to create his guitar.
“To many guitarists the Firebird offset style shape is an acquired taste. But if you were a Johnny Winter fan or influence by his playing like I was, the FB is a must have in your collection. It’s long and sleek and definitely nose heavy but its body shape makes a great arm rest when you play it standing for a while. The Solo FBK kit has none of the more extreme traits of the original guitar. The FBK body and headstock are a little smaller while retaining the classic lines and I find it to be well balanced and very playable.
This is my second FBK project and for this build I got a suggestion from a friend to go with a grey colour similar to what is being found on some European and more exotic automotive finishes. I liked the idea because you don’t see a lot of grey on guitars but I also wanted to highlight the wood both visually and in its feel. So the goal was to make it grey and incorporate the look and natural feel of a fine furniture piece. To achieve this I chose to use a combination of dyes and a premium hard wax oil solution that does not leave a film-like finish on the surface of the guitar. In other words I wanted to feel the wood instead of the finishing material.
The ‘construction’ part of the project began with the requisite sanding of the protective poly coating and scratch removal to prepare the surface of the wood. For this build I laid out a pattern for a belly cut and contour for the right arm which was cut using a grinder then smoothed with lot more sanding. The headstock was also bevelled to add more dimension and color. To enhance the wood grain pattern I used a medium wire brush followed by some more light sanding with finer grit sandpaper. For the neck I wanted the fingerboard and string height to be closer to the body so I sanded down the heel of the neck to achieve the desired profile and angle. The frets pretty good right out of the box but I still like to relevel, crown and polish them to my liking.
The colour scheme I wanted was a natural wood tone on the raised center surrounded by the grey colour on the wings and neck. For the wood tone I would normally use Angelus leather dyes which provides for a vivid colour. However, in this case I wanted a more natural wood tone and chose to use a mix of ‘Burnt Umber’ and ‘Burnt Sienna’ Color Fx wood dyes diluted with water. The top coat was an application of Rubio Monocoat’s Oil Plus 2C ‘Pure’ directly over the dye. No sanding sealer or shellac was used to seal-in the dye because it would have added a film layer and also prevented the Rubio Monocoat from penetrating and bonding to the wood. The pickguard was made from an interesting piece of a species in the mahogany family that I found at an exotic wood store. I can’t remember the name of that wood and I was finished it in the same way but without the need for the dye. For the rest of the body and neck I chose to use Rubio Monocoat ‘Pebble Grey’ precolor as a base followed by a coat of Oil Plus in ‘Morning Mist’ for the final colour coat. The entire guitar was then coated with an application of the Oil Plus ‘Pure’ to ensure that the top coat is consistent and even. The result is a finish that has a natural wood feel but has very little sheen. To bring up the finish to a satin look I added a coat of their ‘SheenPlus’ product.
Assembly was pretty straight forward. I used the kit supplied hardware to mount the neck. For the rest of the hardware I chose to use the Tone Pro bridge and tail piece set in nickel. It’s solid and I like the quality look and feel. The nut I chose was the Graph Tech TUSQ which I sanded to a perfect fit. The machine heads a set of left-handed Graph Tech ratio locking tuners. The electronics and wiring was also straight forward using standard 500K pots and 0.047uf capacitors and a Solo Pro switch. To make sound I chose to use the Seymour Duncan Custom Mini Humbucker set which according to their literature is a modern take on the classic Firebird tone with a little more punch out of the bridge pickup. I used the kit supplied strings for the setup including filing the nut height, intonation, etc.
Overall the build came out pretty close to what I expected. Most of the work was in achieving the color and texture of the finish – there was a couple of due-overs along the way. I actually purchased a B stock FBK body for testing the finishing products and color choices and practicing the approach before applying it to project components. The quality of the kit was excellent and as always the folks at Solo were very helpful along the way. That B stock body is now going to be the basis of my next project where I will route that body for a set of P90’s and marry it to a left-handed roasted maple Tele neck. It should be fun.”
– Randy K






















6 Responses to “Guitar Of The Month – May, 2026”
WOW! I love it! Great job!
Gorgeous guitar, Randy. When I was first starting out, I used to listen to Johnny Winter (mostly the live album…vinyl record) for hours in my room, and play along to learn from it.
(Side note: In later years I even had the privilege of meeting Edgar when we were boarding the same plane at LAX.)
It was as if the Firebird was growing out of Johnnys arms. Like it was another part of his hands. This is beautiful work and I bet JW, himself would be thrilled to play it.
Great job, beautiful work.
Cheers
Randy, turned out great! Like the pick guard and the custom work you did on the body, neck and headstock! Well done 👍
Nice job, great colour combo!
Awesome build !
Beautiful Build ..! Stoked to see how doing a little extra in a few significant ways turns a kit build into a really respectable looking (and hopefully great playing) instrument ..!