Description
The Solo Pro Black Conductive Shielding Paint is the quickest and easiest way to shield your pickup and electronics cavities. It’s water-based so it cleans up easily while wet with just soap and water. For best results, it’s recommended to brush on at least 1-2 coats. Don’t forget to let it dry in between coats! The 2oz size is geared for 1-3 guitar cavities.
Available in:
2oz jar (59.14ml)
8oz jar (236.58ml)
Shop Size – 16oz jar (473.17ml)
Features
- High water resistance and environmentally friendly
- Does not contain toxic solvents, plasticizers, or any other toxic ingredients.
- Ingredients: Water, pure acrylic binder, graphite, carbon black, additives, preservatives.
- Dries overnight
- Highly breathable with very low VOC content
- Perfect protection against the 5G network
- Attenuation level: Single layer 39 dB, Double layer 49 dB, Three layer 59 dB
: Solo Pro Black Conductive Shielding Paint
: SL-SHP
Jimmy Nitsopoulos (verified buyer) –
Great option to shield guitar cavities..
It works well.
I recommend it.
physicsman (verified buyer) –
Used it on the SGK-1 kit with Seymour Duncan Phat Cat P-90s. Very quiet; very happy.
bholt (verified buyer) –
Excellent product – works perfectly – easy to apply
MathewL (verified buyer) –
Works great! Applied two coats to a guitar cavity I was working on. No noise!
Paul Demunnick (verified buyer) –
Easy to apply and works amazing well for grounding your guitar cavities.
Yan Bourgeois (verified buyer) –
Great products, I ordered the smaller size container and will likely have enough paint to do 3 or 4 more guitars.
Calvin Gehlen (verified buyer) –
I prefer paint over tape for shielding and this paint is great for that. Tested for continuity after it dried and it is doing its job.
pbond (verified buyer) –
An excellent shielding paint with a very good carbon mix. I have used other brands over the years and have always had to apply more than 1 coat to achieve proper conductivity. Not so with Solo’s mix. One coat and it was perfect with full conductivity. This is very cost effective and time saving so factor that into the price before you consider some of the “low price” shielding paints out there. I will be certainly be purchasing this from Solo again – great product!
Kent Cowgill (verified buyer) –
Goes on great, works well! I bought the 8oz version but was a little surprised to see it arrive as 4x2oz cans 🙂 That just means the rest will stay fresher longer!
bassman43n1 (verified buyer) –
Works great, the best shielding paint I’ve found for price, effectiveness and coverage. I will definitely buy this again when I need more, but that will be at least three guitars from now!
rollysv301 (verified buyer) –
After using Copper Shielding on my last 3 projects changing to Paint Shielding sure made things easier!!!! My future Projects will definitely include Paint shielding from SOLO. Great Service from these guys!!
eric.laforest (verified buyer) –
Excellent paint. it’s very inexpensive, water-based, nearly odorless, and has good spread and adhesion.
A thin coat dries in about 20 minutes and is ready for a second coat. Two coats will get you to 30 Ohms/sq, which is good enough for basic shielding.
And 2oz goes very far, definitely enough for a couple guitars/basses at least.
It also worked great to shield a plastic-cased pedal.
donnie (verified buyer) –
I started out using copper tape for shielding but it was always a pain and often seem to come loose at the most inopportune times so then I discovered shielding paint on the Solo Guitar Site and it was so much easier and convenient and quicker. I am very pleased and my guitars sounds have less noise than before.
trev mcnaughton (verified buyer) –
I really liked the clean up and overall it seemed to help.. but I’m only giving it 4 stars because it seemed to be quite less effective than using the foil tape. Using both together basically eliminated all hum on my 60’s strat.
It’s super easy to clean up as well. Seems to be waterbased so it essentially just wipes away with a wet cloth. Which was nice after dealing with finish and stains.
Also don’t be lazy when doing the pickguard, take the pickups out to get good coverage and avoid the stuff leaking into the pickups. This stuff can get pretty messy.
Kono (verified buyer) –
Did the back of my Custom Alperious Pick Guard’s wooden/stainless plates (pick guard/control plate/battery cover plate), and this worked well. I much prefer this to using copper foil on the back of Mr. Alper Eskimez’ beautiful artwork, Plus having to take a blade to the edge of any pick guard, may potentially lead to minor nicks and scratches… especially if they’re wood backed. Allow plenty of time for each coat to cure in a ventilated area, and don’t rush the second and third coats, as allowing each coat of paint to cure properly, ensures the final result turns out smooth and level (no small bumps/clumps which may scratch the Bass or guitar’s finish beneath the plates.
I also applied two additional coats over top of Fender’s insufficient carbon shielding paint, and completely eliminated the cellphone-in-the-pocket noise inductance issue. My 3mm thick home-made brass shielding plates, installed beneath the pickup foam, also likely contributed to making my Tom Brantley Rewind’s – Geddy Lee Pups almost 100% silent now. Win.
I definitely recommend this shielding paint.
5 stars.
rhamel978 (verified buyer) –
I always use this product with excellent results. I find it easier than copper foil for the cavities. Two coats in the cavities and copper foil
on the pick guard and cavity covers . I believe my guitars are as quiet as possible.
nrprus88 (verified buyer) –
Havent used the product yet. Container broke during shipping. Customer support responded right away and replaced the product with next day shipping. AMAZING!
tboneboulet (verified buyer) –
This product works great, needs 2 coats to be effective.
Terry Kempler (verified buyer) –
Excellent! No smell. Goes on easy. Washes up with water. One coat and I had conductivity/continuity with a voltmeter. Plenty in the 2 oz size.
cj rogers (verified buyer) –
Works very well, and easy to apply.
Mark (verified buyer) –
👌
korzj (verified buyer) –
Works superbly. Prefer this painting method to messing around with the tape stuff. Easy to use. And shipping was superb as well.
Terry McBride (verified buyer) –
The shielding paint worked very well on my new strat build and was easy to apply.
fabien (verified buyer) –
Nice and thick it covers well, no issues.