Congratulations goes out to Joel Schoolnik for his guitar build, to earn him Guitar of the Month for February 2026.
Joel used our FYK-1 kit as the basis to create his guitar.
“I have too many guitars, but the thirst for more never goes away. As a compromise, I decided I can only add a guitar if I build it. This is my 4th Solo Guitar kit. The Parker Fly is an iconic guitar that I always found facilitating, but totally unnecessary for what I play. That said, I’d had the Solo FYK-1 in my favorites for a while. The kit arrived with a beautiful mahogany body and neck. The hardware was good too. But I had some leftover parts from other kits such as locking tuners and pots/switch/harness for a Gibson SG. I also splurged on some P90 pickups.
Step 1: Carving the control cavity for two more pots. I wanted a two-volume, two tone setup like an SG. So I had to make space for the pots and a new place for the switch.
Step 2: Shaping the guitar body. The Parker Fly has a thin, iconic body shape that I know I have neither the skills, tools, or know-how to reproduce. But I wanted to keep this build in the same spirit. That means comfortable and light, with some interest added in. I sketched out contour lines that complimented the silhouette. I also put specific carves to allow better playable access to the high frets. With the finalized lines drawn on, I got my angle grinder with a raspy bit and plunged in. I moved on to rounded files and finally an orbital sander. I mimicked the same angles I’d added to the body to the headstock – again using grinder, files, and orbital sander. Then I moved on to hand sanding the body and neck. Lots and lots and lots of sanding. Especially because I wanted to see the wood grain through the stain and finish – whatever shade and color that would end up being. Lots of sanding.
Step 3: Level and dressing the frets. I straightened the neck and used a leveler. It didn’t take long, but a couple frets were pretty high and got a square on them that required a bit of filing to round out again. I really do not enjoy leveling and polishing frets. But I know how long it takes and what I’m in for. So putting a day aside to just do that without rushing got it out of the way.
Step 4: Pickguard design. I took a picture of the guitar body with my iPad and then drew a bunch of shapes that would work with the flow of the contours and body. I landed on a shape that had curves that mimicked the body. I don’t have a printer. But I was able to use the final iPad image as a guide for drawing on tracing paper the shape I wanted. I copied that to construction paper and cut it out into a template. Then I taped the template to the pick guard material. I then used scissors to get fairly close to the shape I wanted. And then used a dremel to fine tune the silhouette to where I wanted it. For the P90 pickup cutouts, I used a routing template to get the exact shape.
Step 5: Stain and finish. Using the same image on the iPad, I experimented with different colors. I ended up thinking the brown mahogany looked best. I used some Miniwax Bombay Mahogany stain and some Tru-Oil Gunstock Finish to make a smooth hard coating.
Step 6: Assembly. First I lined the control cavity with copper tape for shielding. Then I put on the neck and hardware for the strings. I also lined the pickup cavities with shielding as I was worried the P90s (being single coiled) might be noisy and prone to interference. Then I added in the pickups, pickguard, controls, and jack. I spent some time making sure the neck and bridge was set with the right action, and dialed everything in.
Honestly, I didn’t plug it in until I had it all set up, and the strings were staying in tune (which is probably not the best idea). But it worked – and it sounds great! Those P90s are awesome when the amp is just breaking up. And the guitar is fairly light, and very easy to play. I’m really happy with it!”














