General
Model Number
FYK-1
Series
FY Style
Body Information
Body Material
Mahogany
Body Shape
FY Style
Body Finish
Sealed
Neck Information
Neck Material
Mahogany
Neck Finish
Unfinished
Scale Length
25.5" / 648mm
Fingerboard Material
Rosewood
Fingerboard Radius
12"
Number of Frets
22
Frets
Medium Jumbo, Nickel Silver
Nut Material
Plastic
Nut Width
42mm
Position Inlays
None
Truss Rod
2-Way-Action
Truss Rod Nut
4 mm Hex
Hardware & Electronics
Finish
Black
Pickup Configuration
2 x HB
Pickups
Ceramic Pickups
Controls
1V, 1T, 3-Way Toggle
Bridge
Tune-o-matic, Stop bar
Tuning Machines
Grover Style
Potentiometers
Full Sized Pots
Misc
Includes all mounting screws, strap buttons, and plates
Accessories
Includes
Hex Adjustment Keys & Instrument Cable
Michael Pahl (verified buyer) –
The wood was exceptional the mahogany was great to work with. I ran into very little issues with the kit. The only thing being the neck may need a shim to get the action slightly lower, it was still highly playable just not to my liking. I used tung oil on the whole body and neck and the joints were well bonded and barely noticeable which to means high quality jointing. The neck took very little work to get to a level. All in all probably 7 hours of labour with the finishing and I rewired the whole thing with my preferred pots and pick ups. Definitely going to try another build from here hopefully something a little more challenging.
mbryan3 (verified buyer) –
Parts are just fine and body was less work than the P Bass kit. Headstock is cool, but I will reshape to fit my logo .
Electric will change to my favorite EMG. I like the prewired , plug in sets they make. If you have seen an original Fly, this body will look very thick.
Many of these kits need fret end work. So buy some finishing products , not just a file.