CrystaLac Amber Toned Sanding Sealer can be applied by either brushing or spraying. Its thin viscosity makes it easy to spread and allows it to penetrate into porous woods. Sand bare wood with 220 grit sandpaper. Apply 1 coat of Sanding Sealer and allow to dry. Lightly scuff sand to remove any raised grain fibers. Apply an additional 1 to 2 coats to seal wood and provide an excellent surface that will be ready to topcoat.
CrystaLac Sanding Sealer can also be used as a pre-stain conditioner. Apply 1 coat of Sanding Sealer to bare wood and allow to dry. Sand back down to bare wood leaving the sealer only in the wood grain and pores. Apply stain and allow it to thoroughly dry. Oil based stains can take up to a week to dry. Apply another 1 to 2 coats of Sanding Sealer over the dried stain. This will help to seal the stain color down and keep it from spreading. It is now ready for a clear top coat.
Available in Mini (8oz) & Pint (16oz)
- Minimizes grain raise, and enhances color
- Dry Time: 30 min to 1 hour
- Recoat Time: 1 to 2 hours
- Penetrates and Prepares wood for Top Coats
- Enhances and Warms Wood Tone
- Seals wood fibers and minimizes grain raise
- Made in the USA
Item shown: CrystaLac Amber Toned Sanding Sealer
Model #: CR-52