Description
This Solo guitar neck is intended as a replacement or DIY project. Neck specifications may have a +/- 1 or 2mm variance. If using this neck with a non Solo body / Solo hardware, slight modifications may be necessary in order to achieve a proper fit. This neck is unfinished and comes pre-sealed with a poly-resin sealer.
Features
- Maple Neck
- Maple fretboard
- 15″ Radius
- 22 Frets
- 2-Way Truss Rod
- Black Dot Inlays & Side Markers
- 25 1/2″ Scale Length
- Nut Width: 1 5/8″
- Thickness at Nut: 13/16″
- Thickness at 12th Fret: 15/16″
- Width at 12th Fret: 2 1/16″
Item shown: Solo ST Style 22 Fret Guitar Neck With Maple Fretboard
Model #: SL-STNM22H-U
UPC: 0787392886824
Michael Van Helvert (verified buyer) –
Solid neck nice grain straight not much fret work to do either
hamstring81 –
Very nice neck! Can’t beat the price. There were some blemishes in the neck from the fret wire install that came out darker than the rest of the wood after treating the neck with a lacquer spray finish. It still looks nice in my opinion and doesn’t bother me. There was also some damage to the neck at the bottom corner of the fretboard due to shipping it from Canada all the way to Hawaii I am guessing. It was packaged fine but it still took some damage. I was able to lightly hammer and sand the corner to correct it.
I bought this to replace the neck that came with the DIY kit that I previously purchased from Solo. I stripped the truss rod of the original neck and figured buying another Solo neck for a Solo body was the way to go. Overall very happy with the quality of this neck.
james.m.alexander (verified buyer) –
Very good quality. Got it for a kit i’m building n wanting to do something similar to Hank Marvins famous guitar & this does it for me Delivery was quite good too well packaged & reasonably fast.
Shawn Blouin (verified buyer) –
Very good neck! I have a older, less expensive version of this neck but the specs are fairly similar. It’s a little chunkier than I like BUT I can’t deny that the fret edges are flush with the fretboard and that they haven’t sprouted in the 2 or so years I’ve had it. On the topic of frets, the fretwork’s pretty decent but as with any other neck, you’re gonna have some small things to fix, in my case there’s some high frets higher up the neck. TL;DR they’re good necks but some frets might need a little TLC.
Micheal Weselak (verified buyer) –
Good neck. Very minimal fretwork required, and my only complaint is that I’m not better at spraying lacquer! Seriously though, great neck for the price.
jadyvig (verified buyer) –
This is a great neck, it has a unique but easily “modified” headstock to match “certain guitars” 😉. It plays fast an smooth. As mentioned by others, I also had to do some minimal fret-work, but I live in Central-Alberta, so a lot of the work I did on the neck is probably due to climate. Either way, I happy with it, and would buy one again.
Travis Freeman (verified buyer) –
For the price, guitar neck was worth it
The neck is to thick for me but plays good