Description
This DIY guitar kit has everything you need for building your own custom ST Style Electric Guitar. You will need only some basic tools and finishing supplies. All challenging wood cutting, drilling and shaping is already done professionally, as well as fret leveling and dressing. A detailed manual is included with step by step instructions.
Recommended tools: Solo Guitar Assembly Kit Bolt-on Neck
Kit includes:
- Unfinished basswood body with a poly sealant
- Unfinished maple neck with maple fingerboard
- Solderless wiring
- Full size potentiometers
- Press-fit peghead bushings
- String Retainers
- Tuning Machines
- Strings
- Strap Buttons
- Pickguard Assembly
- Tremolo bridge
- Jack plate
- Neck Plate
- Back Plate
- Spring Claw
- Springs
- Ground Wire
- Cord
- Truss rod Allen key
- Bridge saddles Allen key
- All mounting screws are included
rexelwell (verified owner) –
After looking at these quite a while I decided to give it a try. Having zero experience, the whole assembly was a learning curve, but a lot of fun. My biggest concerns were the neck pocket being square and not loose, and the neck being usable. All of the pre-drilled holes were spot on, and the neck fit perfectly. I ended up upgrading the pickups and pick guard to a loaded tort guard with Tex-Mex pickups. My faded Fiesta Red turned out a little on the 80’s Fiesta Pink side, but it’s all good. Would highly recommend this kit. It won’t be my last for sure!